MODEL SD550
The Versatile SD550 is an all-purpose offset disc that weighs in the 550 lbs per foot weight class. It is an all purpose machine that provides the flexibility of doing either primary or secondary tillage work. The SD550 is available in either 9" or 10.5" blade spacing with 24" or 26" blades.

MODEL SD650
The model SD650 Versatile offset is an excellent primary tillage tool. Designed for forage breaking and heavy residue this disc is perfect for all agricultural applications and light industrial work. The SD650 is available in working widths from 10' to 20' and choice of 10.5" or 12" blade spacing

MODEL SD1050

The Versatile SD1050 is a heavy-duty disc designed for heavy construction and mining applications and the most demanding agricultural jobs. The SD1050 features a floating hitch to ensure a smooth level finish on all jobs. Available in 9-1/2' to 15-1/2' widths the SD1050 comes with a standard 14" blade spacing.

 

Blade Scrapers
All Versatile discs feature one piece, 4" wide blade scrapers made of carbon steel for long wear life. The scrapers are U-bolt mounted for maximum adjustment on a heavy-duty tubular steel bar. All scrapers are located high end to the inside of the blade for maximum trash flow and to reduce draft requirements. This eliminates the need for trash guards.

Adjustable Gang Angle

Positive Depth Control

A 5-1/2" heavy-duty rockshaft, in greaseable bearings, is the foundation of the single offset disc‘s depth control system. A single cylinder with positive depth control segments provides consistent and repeatable working depth. An adjustable crank allows the operator to regulate the balance of pressure on both front and rear gangs.

 

 

Removable Spindle Axles
Versatile offset discs are built with maintenance concerns in mind. All spindle axles are designed for easy removal and maximum strength. Each spindle is bolted into a sleeve and can be removed by simply removing the bolt and pulling out the axle. This will save valuable time if repairs to a tire are needed.

All Versatile discs feature a large 1-15/16" diameter, high carbon steel gang shaft. This gang shaft along with Versatile’s steel fabricated spools allows the gang assembly to be torqued at the factory to 3200 ft/lb.

 Furrow Filler Blades

In  order to get the most uniform and consistent field finish, Versatile offset discs have furrow filler blades as standard equipment. On larger working widths two furrow fillers are standard, one 4" smaller than the working blades and one 8" smaller, (only one furrow filler is used on model SD1050). On smaller working widths one furrow filler blade 4" smaller that the working blades is standard. These blades along with full sizes blades work together to create a uniform well-worked field.

 

For those who want additional protection flex hangers are available as an option. With the extreme thrust forces present on a disc and potential for large rocks in some areas, the stone flex hanger is a perfect choice for absorbing shock loads. The 1-1/4" x 2-1/2" C-shaped spring steel reacts to both vertical, but more importantly, horizontal forces. Disc blade penetration is not compromised.

Pan-Style Scrapers

 

Model	SD550		SD650		SD750		SD1050
Working Width	10' to 20' (3 to 6.1 m)				10’ to 15’ (3.0 to 4.5 m)		9.5' to 15.5' (2.9 to 4.7 m)
Bearings	410 WSS series		T2-215 series trunnion mounted, regreaseable, 10342 kg (22,800 lb) radial load rating