Landini 5-100

The Total View Slim cab

FPT F36 Engine: built for ultimate efficiency

To meet the requirements of the new Stage V/Tier4 Final emissions regulations, Landini redesigned the engine/transmission combination of the Serie 5 tractor in order to keep performance and efficiency at peak levels. The exhaust gas after-treatment system is no longer mounted onto the cab right post, but has been moved under the hood to provide full visibility during work. The new Serie 5 tractors are powered by FPT F36 3.6L four-cylinder turbo engines with multivalve technology, intercooler and common rail injection system. The three models in the range deliver 95, 102 and 114 hp and meet the Stage V/Tier 4 Final emissions regulations using DOC, DPF and SCR after-treatment technologies.

A configurable transmission to suit every need

Designed with versatility in mind, the Serie 5 offers up to eight transmission configurations to meet the specific needs of each farm: 1. Speed Four: 12FWD + 12REV speeds with synchro shuttle. 2. Speed Four: 24FWD + 24REV speeds with synchro shuttle and creeper. 3. Power Four with hydraulic Hi-Lo: 24FWD + 24REV speeds with synchro shuttle. 4. Power Four with hydraulic Hi-Lo: 32FWD + 32REV speeds with synchro shuttle and creeper. 5. Power Four with hydraulic Hi-Lo: 24FWD + 24REV speeds with power shuttle. 6. Power Four with hydraulic Hi-Lo: 32FWD + 32REV speeds with power shuttle and creeper. 7. T-Tronic with HML powershift: 36FWD + 12REV speeds with power shuttle. 8. T-Tronic with HML powershift: 48FWD + 16REV speeds with power shuttle and creeper. Landini has further upgraded its range of rugged and reliable transmissions to enhance their performance in terms of power transmitted and fuel efficiency.

New hydraulic system for enhanced productivity

The open-centre hydraulic system of the Serie 5 tractor can be equipped with up to 3 pumps with a total flow rate of 82 l/min. This increased hydraulic capacity allows the operator to:

1- speed up work;
2- carry out multiple tasks simultaneously;
3- perform heavier-duty tasks;
4- reduce consumption thanks to lower rpm engine operation;
5- increase comfort and reduce fatigue thanks to lower engine noise and vibration;
 6-turn smoothly, including when performing heavy-duty tasks, thanks to a 32 l/min dedicated steering pump

The Serie 5 can be equipped with up to six remote valves. Three valves are mechanically operated and one is electronically controlled. Two additional mid-mount remotes allow the use of front-mounted implements such as the front loader. One valve can be optionally equipped with a flow divider that splits and directs the flow to two separated outlets. The Serie 5 can be equipped with four types of remote valves that can be used in combination to suit different application needs: - Standard: double-acting; - Kick-out: with automatic detent release; - Float: for implements following the ground contour; - Hydraulic/Floating: for the use of implements requiring a hydraulic motor