It appears that software on your computer is blocking JavaScript.
Please configure your security software or browser plugins to allow this
website to load JavaScript.
ID # 38144438
Vermeer D500X500 HDD
Overview
Field-tested to prove it can handle the toughest large-diameter projects, the D500x500 Navigator® horizontal directional drill is equipped with all the features HDD operators need to get the job done. It drills through almost any ground conditions with 50,000 ft-lb (67,790.9 Nm) of rotational torque and 500,000 lb (2,224.1 kN of thrust/pullback.
Specifications
operational
Thrust
500000 lbs (2224.1 kN)
Weight
38000 lbs (17236.5 kg)
Pullback
500000 lbs (2224.1 kN)
Clamp Force
250000 ft-lb (338955 Nm)
Fuel Capacity
500 gal (1892.7 L)
Breakout Force
253000 ft-lb (343022.5 Nm)
Inside Diameter
9.8 in (24.9 cm)
Drill Rack Angle
8 degrees to 12 degrees
Maximum Spindle Torque
102500 ft-lb (138971.6 Nm)
Rear Base Anchor Width
7.8 ft (2.4 m)
Front Base Anchor Width
6 ft (1.8 m)
Front Flat Anchor Width
5 ft (1.5 m)
Hydraulic Tank Capacity
720 gal (2725.5 L)
Rear Base Anchor Height
8 in (20.3 cm)
Rear Base Anchor Length
16 ft (4.9 m)
Front Base Anchor Height
24 in (61 cm)
Front Base Anchor Length
20 ft (6.1 m)
Front Flat Anchor Height
8 in (20.3 cm)
Front Flat Anchor Length
9.5 ft (2.9 m)
Height (Minimum Transport)
11.5 ft (3.5 m)
Length (Minimum Transport)
50.5 ft (15.4 m)
Maximum Spindle Torque (Low At Maximum Engine RPM)
50000 ft-lb (67791 Nm)
Maximum Spindle Speed At Maximum Engine RPM (with PS800)
66 rpm
Maximum Spindle Speed At Maximum Engine RPM (with PS1200/PS1600)
54 rpm
features & options
Features & Options
Features
Remote Lockout Yes Strike Alert Yes
litareture
Documents