Quantron – Control from the Cab of your Tractor

Quantron S-2

Calibration

The Quantron S-2 terminal guides the operator through the calibration process, and is completed in minutes. Simply enter the seed type, target rate and forward speed. The Quantron S-2 provides the setting for the metering unit and indicates whether the small seed splines are necessary or not. The Quantron S-2 will indicate the maximum and minimum seed rates and forward speed possible with the given metering unit setting. Up to 60 sets of calibration data can be saved for future reference.

During calibration, seed is metered through the calibration door and into the seed collection bag supplied with the machine. The calibration door is opened and closed without using any wrenches and is equipped with a sensor to prevent the operator from beginning seeding without having first closed it.

The quantity of seed collected is weighed and the weight is entered into the Quantron S-2. The system then provides the operator the final calibration setting.

Metering Unit Adjustment

The Quantron S-2 indicates the required metering unit opening according to the speed type, rate and forward speed entered. The metering unit is then adjusted using the handle and the setting is shown on the easy-to-read scale.

Poly Hopper

A 21-, 34- or 45-cubic foot hopper feeds seed to the electric drive metering unit which uses a speed signal from the tractor to ensure consistent application rate regardless of forward speed variations.

Electric Drive Metering Unit

The electric drive metering unit features a unique dual-spline system meaning there are no components to add or remove when changing between small and large seed types or when switching between rates.

Seed Splines

Small seed splines are used to reduce the volume of the metering unit when working with small seeds at low rates. They are engaged or disengaged without adding or removing any components from the metering unit, and the Quantron S-2 indicates their requirement during the calibration process.

Implement Switch

The implement switch stops and starts the metering unit automatically as the tillage machine is lifted in and out of work.

Options and Ordering Information

Seed Distribution System

Seed Diffuser Option

Diffusers may be mounted at the operator’s preferred location for the respective machine which the CCX 9000ACC is mounted on. Adjustable mounts are available for mounting to a KUHN Krause 24/7® finishing attachment. Mounting to any other machine will be up to the customer. Diffuser angle is easily adjusted with no wrenches required.

Ordering Information